Data Centers and Poor Soils
So, you want to build a data center. A distribution center. A manufacturing center.
The only problem is, all of the good building sites have been gobbled up years ago. The only sites that are still available and that can provide enough land to develop are typically full of clay silty soils that are unsuitable to build on.
Conventional construction methods would require the removal of those soils and landfilling them and replacing them with suitable fill or virgin aggregate. Both of these options provide significant stresses to neighboring infrastructure. It would take 16 triaxle loads of aggregate to treat the same area as 1 tractor trailer load of Portland Cement with typical application rates.
Additionally, stabilization will save time and money…lots of it. By permanently and chemically altering soils, once an area is treated, its done. Move on. The stabilized base provides a safe platform for all trades to work on. Work can resume the day after weather event as opposed to letting a site dry out. The cost of stabilization as compared to conventional construction, including removal of unsuitable soils is approximately one third the cost. And that is just site costs. That does not include the potential repair costs of surrounding infrastructure.
Stabilization utilizes the soils you have already bought and paid for. By stabilizing those soils, you may be able to minimize the overall aggregate and paving depths.
Stabilization is an environmentally friendly process. Reduce fuel consumption required to crush and transport aggregates. Keeps materials out of landfills where it would take up valuable and limited space. Reduces number of trucks on the road which is a positive public relations win.

